Rockman Slate III - 26"

This is our 3rd generation of the Slate frames.
This frame for us was back to the drawing bord, We had to redesign the older slate to ride better and to have a stiffer rear end. And this time we did not forget about the V-brakes lovers out there so the frame will also come in V-brake mount.

- Cut out hole in the head tube save weight.
- U6 Alloy.
- New design CNC machined BB yoke gives improve tyre clearance and freewheel clearance.
- Designed to clear 18T recommend 18:15 gear ratio with 175mm cranks.
- Head tube is 118mm long.
- Simple and small CNC machined horizontal dropouts, 135mm rear dropout spacing.
- The frame needs a snail chain tensioner to run.
- CNC 4-Bolt Magura mounts which is in between the seatstay.
- CNC V-brake mounts.
- This frame also comes in 1.5" headtube size. With this tapered 1 1/8"- 1.5" headtube and fork it will enable riders to have a very stiff front end. For this frame it is sold in a frame kit set.
- sand blasted and then anodised finished Gold, Blue and grey. Only in 1 1/8" head tube size.
- sand blasted and then anodised finished Grey and blue 1.5"
- Weight:1.48kg

Geometry
Wheelbase : 1085mm (with 35mm offset Fork)
Chainstay : 380mm
BB Rise : +55mm
Headtube angle : 71.5